Laser Blood Flow Imaging System OZ-EX1 Two-Dimensiona

Created on 10.20
2D Laser Blood Flow Imager
OZ-EX1 – Two-Dimensional Laser Blood Flow Imaging System
OMEGAZONE OZ-EX1 · Laser Speckle Imaging · For rats, mice and small animal research

1. Overview

The OZ-EX1 is a two-dimensional laser blood flow imaging device designed for measuring tissue blood flow in small animals such as rats and mice. It enables non-invasive, nearly continuous, high-speed, and high-resolution measurement of blood flow distribution in tissues—including the brain and lower extremities—and displays the magnitude of blood flow as a color gradient.
The measurement software includes the following three modes:
Measurement Modes
Mode
Frame Rate
Image Resolution
1. High-Resolution Mode (Hi-Res)
Approximately 1 frame per second
639 × 480
2. Hi-Speed Mode
Approximately 15 images/second
213 × 160
3. Fast Average Mode (HS-AVG)
—
213 × 160
Since blood flow at each point is measured simultaneously, it is possible to determine both the blood flow correlation at each point and the variations in blood flow. The measurement range can be adjusted over a wide range – from approximately 8 mm × 6 mm to approximately 108 mm × 80 mm – simply by changing the lens. The software is divided into an LSI (for measurement) and a LIA (for analysis), enabling multiple analyses of the measured and stored data after completion of the measurements.
The OMEGAZONE OZ-EX1 is a compactified version of our OZ-2 two-dimensional laser blood flow imaging system, which integrates the camera and laser unit into a more compact design. This software is a revised version of the OZ-2 software; therefore, its core functionality and operating procedures remain identical to those of the OZ-2.

2. Working Principle

When biological tissue is irradiated with a laser and a photodetector is used to detect scattered light from stationary tissues and scattered light from flowing red blood cells. When light scatters from a cell, the light intensity varies due to interference change. This two-dimensional interference pattern is called a speckle pattern, and the speckle intensity degree varies over time in accordance with the number and flow rate of red blood cells. As the flow velocity increases, the rate of change in light intensity also increases; even with an increase in the number of photons, this rate of intensity change accelerates.
Doppler frequency shift effect caused by red blood cell movement

Measuring Principle

3. Features

  • The laser unit and camera/lens combination are compact, enabling measurements to be performed in confined spaces.
  • The power supply for the laser unit and the camera is provided by the computer's USB port; therefore, the external power source is solely for powering the computer.
  • The software is divided into two components: LSI for measurement and LIA for analysis.
  • Color mode: Grayscale / Blue-Red.
  • Marking Function: The feature to add markers to images and charts during an event.
  • Differential display: The increase or decrease in blood flow is determined by comparing the displayed image with the reference blood flow image.
  • Zero-cutting operation: Calculate the average blood flow value for the ROI-enclosed region, excluding zero values.
  • ROI Saving Feature: You can save and retrieve up to 8 ROIs.
  • Blood flow value: The average blood flow value for the region surrounding the ROI can be saved as a CSV file.
  • Automatic Gain / Manual Gain: Image brightness can be adjusted automatically or manually.
  • Optical Zero: A feature that reduces image brightness to zero when no laser beam is being applied, enabling measurements to be performed without the influence of external light.
  • Two color modes: Standard/Enhanced.
  • Marking Function: The feature to add annotations to images and charts during an event.

4. Specification

Instrument
Item
Detail
Model
OZ-EX1
Operational principle
Laser speckle imaging
Equipment Composition
Instrument, laser device, USB interface CMOS camera, stand, computer
Hardware — Laptop-based image processor (instrument)
Item
Detail
Operating system
Windows 11
Size
380 x 40 x 250 (W x H x D)
CPU
Intel iCore, or AMD Ryzen
Weight
3 kg
Internal storage
8 GB or higher
DVD
Multi-driver system (supports external devices)
Screen size
14 x 16 inches, 1920 x 1080
Source
220 V / 50 Hz
Software
Item
Detail
Software image pixel count
1600 x 900
Power
350 w
Weight
35 kg
Size
350 x 200 x 520 mm (W x H x D) — Support
Support
Item
Detail
Size
Height: 30 cm × Arm length: 15 cm
Light source power supply
—
Weight
1.5 kg
Source
USB 5 V, 0.4 A
CMOS Camera
Item
Detail
Size
16 x 6 x 15 (W x H x D)
Imaging time
1/30 sec
Weight
Approx. 0.5 kg
Signal output mode
USB, 8 bit
Measurement Laser
Item
Detail
Wavelength
780 nm (laser)
Power
≤ 70 mW; CLASS 1

5. Software Functions (LSI measure / LIA analyse)

Function
Description
FLOWprice
Average value within the ROI region. The change in blood flow values over time is displayed in the bottom-left panel.
ROI
The function for defining a survey area: LSI allows the definition of two areas, while LIA allows the definition of up to eight areas.
MAX
Set the upper limit of the measurement range for coloration.
MIN
Set the lower limit for the coloration measurement range. Areas where the measurement result is below this value are displayed in gray or blue.
Pattern
HR, HS, HSA
Data
The measured blood flow values within the selected ROI can be exported and saved as an Excel file.
Mode 1 — High Resolution
High Resolution (High-Resolution Mode): 1 frame / second, Resolution: 639x480
Mode 2 — Hi-Speed
Hi-Speed (High Speed Mode): 15 frames/second, Resolution: 213x160
Mode 3 — HS-AVG
HS-AVG (Fast Average Mode): Set the average, resolution: 213x160
Histogram
The histogram of blood flow is displayed in the bottom-right corner.
ZE Mode – Zero Abnormality Mode
A function that calculates blood flow by excluding the zero-value portions from the selected region.
Play animation
Provides a feature to play saved consecutive images, allowing you to set the number of images to play per second.
Save Settings
Setpoint Preservation Function
Forward & Backward
Display the previous or next image
Initial Settings
Return each function to its original function setting.
Previous & Next Jump
The "Jump to previous / next few images" feature allows you to specify the number of images to skip.

6. Applications

  • Cortical blood flow measurement
  • Measurement of spinal cord and peripheral blood flow
  • MCAO molding
  • Measurement of blood flow during vasodilation, vasoconstriction, and ischemia
  • Tissue blood flow measurement
  • Skin blood flow measurement
  • Gingival blood flow measurement
  • Gingival blood flow measurement
  • Mucosal blood flow measurement
  • Allergy Research
  • Environmental Physiology Research

7. Company Information & Contact

Guining (Shanghai) Experimental Equipment Co., Ltd.
©2024 Labcan Scientific – All rights reserved. Labcan is committed to continuously improving its product functionality and reserves the right to modify its products and technical specifications without prior notice; for further details, please consult your local technical engineer.
Labcan Scientific Supplies Shanghai Co., Ltd
Contact
Item
Detail
WeChat
Feel free to add our WeChat account to learn more.
Technical Support Hotline
400 920 2386
Email
info@labcan.cn
Website
www.aschchina.cn
©2024 Labcan Scientific – All rights reserved.
Contact
Leave your information and we will contact you.

COMPANY

Contact us

About us

Join with us

Our Clients

Terms and Conditions

Privacy Policy

Sitemap

QUICK LINKS

Home

Products

Join with us

Blogs

FAQ

Service Request

电话